The Cisco? Third-generation 1-, 2-port and 4-port T1/E1 Multiflex Trunk Voice/WAN Interface (MFT VWIC3s) support data and voice applications on the Cisco 1921, 1941 and 1941W (data only), and the Cisco 2901, 2911, 2921, 2951, 3925, 3945, 3925E and 3945E Integrated Services Routers. The Cisco MFT VWIC3 combines WAN-interface-card (WIC) and voice-interface-card (VIC) functions to provide unparalleled flexibility, versatility, and investment protection through its many uses. Customers who choose to integrate data and voice in multiple steps preserve their investment in a T1/E1 WAN interface because the Cisco MFT VWIC3 cards can be reused in packet voice applications. The 2 port T1/E1 MFT VWIC3 is shown below.The Cisco MFT VWIC3 interface cards add improvements over the Cisco Second-generation 1- and 2-port T1/E1 Multiflex Voice/WAN Interface Cards (MFT VWIC2s). The Cisco 2- and 4-port MFT VWIC3s enable each port to be clocked from an independent clock source for data applications. Voice applications can now be clocked independently from data applications, with all ports for voice applications clocked from a single source. The Cisco MFT VWIC3s use the ECAN on the motherboard PVDM cards with up to 128ms echo-tail length for demanding network conditions. MFT VWIC3 cards support up to 2 channel groups per T1/E1 port for serial data applications. Refer to Table 3 for all configuration options offered with the MFT VWIC3 cards. The Cisco MFT VWIC3 cards can be inserted into the EHWIC slot on the supported Cisco 1921, 1941, 1941W, 2901, 2911, 2921, 2951, 3925, 3945, 3925E and 3945E integrated services routers. The T1/E1 MFT VWIC3 cards support both T1 and E1, providing additional flexibility in configuring the Cisco MFT VWIC3s for supporting T1, fractional T1, E1, and fractional E1 for both voice and WAN applications. All MFT VWIC3 modules include the drop-and-insert multiplexing capability, which eliminates costly external third-party channel service units/data service units (CSUs/DSUs) and drop-and-insert multiplexers. The Cisco MFT VWIC3 cards are offered in single-, dual- and quadruple-port versions, which can be used and then redeployed as network requirements change, thereby addressing several applications: T1/E1 data: The Cisco 1-, 2- and 4-port T1/E1 MFT VWIC3 versions act as a WIC, supporting T1, fractional T1, E1, (including structured G.703 with G.704 framing), fractional E1, and E1structured G.703 applications. To simplify remote management, these MFT VWIC3 cards integrate a fully managed DSU/CSU for T1 deployments and a fully managed DSU for E1 deployments. E1/G.703 data: The Cisco 1- and 2- port G.703 MFT VWIC3 versions act as a WIC, supporting T1, fractional T1, E1 (including structured G.703 with G.704 framing), fractional E1, and unstructured E1 (G.703) applications. To simplify remote management, the G.703 version includes a fully managed DSU. The G.703 versions also support all the capabilities on the T1/E1 versions. T1/E1 packet voice: The Cisco 1-, 2- and 4-port T1/E1 MFT VWIC3 (voice and WAN) versions act as a VIC, supporting packet voice applications by providing T1, fractional T1, E1, and fractional E1 connections to private branch exchanges (PBXs) and central offices, thereby enabling new services and reducing voice and fax toll charges. Mixed data and packet voice: The Cisco MFT VWIC3 interface cards can simultaneously support both data and voice, reducing the complexity and number of network components and facilitating a graceful migration to bandwidth-efficient packet voice. Mixed data and packet voice with drop and insert: The Cisco MFT VWIC3 cards can be deployed as a T1/E1 drop-and-insert multiplexer with integrated DSUs/CSUs, reducing the complexity of the network and the cost of the central-office ports by efficiently combining time-division multiplexing (TDM) voice (PBX), IP voice, and data on the same trunks. Cisco 1900, 2900 and 3900 ISR routers support drop and insert between ports over a single MFT VWIC3 card and two ports over two different MFT VWIC3s
- Condition:
-
New
- Availability:
- 0
- Number of Ports:
- 4
- Manufacturer:
- Cisco
- Form Factor:
- 4-Port T1/E1 Multiflex Trunk Voice/WAN Interface Card
- Part Number:
- VWIC3-4MFT-T1/E1
- Device Type:
- Interface module
- T1 Support:
- Yes
- E1 Support:
- Yes
- Unstructured E1 G703 Support:
- No
- Data Support WIC Mode:
- Yes
- Voice Support VIC:
- Yes
- Drop-and-Insert Multiplexing:
- Yes
- Serial Data channel-group:
- 4 total
Write a Review
Shipping
Avanti Global Resources is committed to shipping your order as quickly as possible. We know how vital our customers IT needs are to keep business running smoothly. Please reference the below shipping information to answer your questions.
Service |
Delivered By |
Transit Time |
Cost |
FedEx Ground FREE (Free Ground shipping on orders over $75.) |
Varies |
1–5 Business Days |
FREE |
FedEx Ground |
Varies |
1–5 Business Days |
$15.00 |
FedEx Express Saver |
4:30 p.m. |
3 Business Days |
$28.00 |
FedEx 2 Days |
4:30 p.m. |
2 Business Days |
$38.00 |
FedEx Standard Overnight |
3:00 p.m. |
Overnight |
$48.00 |
FedEx Priority Overnight |
10:00 a.m. |
Overnight |
$68.00 |
FEDEX GROUND SHIPPING MAP
THIRD PARTY ACCOUNTS
Ship on your account! Avanti Global Resources allows all of our customers the freedom to ship on their preferred shipping account at no additional cost. When placing your order online, simply specify FedEx, UPS or DHL and enter your shipping account number and preferred shipping method in the order comments feild. If you prefer to order by phone, please call 1-888-832-4789 and our sales team will be happy to assist you.
AVANTI SHIPPING DEADLINES
- All orders placed before 4 pm EST M–F will be shipped that day.
- Please call 1-888-832-4789 for overnight shipping arrangements after 4 pm EST.
SHIPPING FACTS
- FedEx shipping rates are subject to FedEx service offered in your area.
- Shipments to Hawaii and Alaska are subject to additional fees.
- Orders placed on Saturday or Sunday will ship Monday.
- Additional shipping charges may apply for orders over 10 lbs.
TRACKING
- Tracking Numbers are sent to customers e-mail by 9 PM EST day of order.
- To request your tracking number, please e-mail support@avantidp.com
INTERNATIONAL
- Please call 1-888-832-4789 for all international shipping.